Industrial oils
EUROLUB CENTRAL HYDRAULIC-FLUID ZH-L
ZH-L CENTRAL HYDRAULIK-FLUID has been developed specifically for use in central hydraulic systems, power steering systems, sun roof mechanisms, hydro-pneumatic suspension systems and shock absorbers. Its first-rate viscosity-temperature behavior guarantees safe operation at high steady-state temperatures, as well as a sensitive response at very low temperatures. Color: brown
EUROLUB BRAKE FLUID DOT4 LS.6 (CLASS6)
DOT4 LS.6 is a special, low-viscosity brake fluid for corresponding regulations according to ABS, ASR and ESP. DOT4 LS.6 is based on glycol ether and contains effective corrosion inhibitors and antioxidants. DOT4 LS.6 has a high thermal stability. DOT4 LS.6 is characterized by excellent corrosion protection against ferrous and non-ferrous metals.
EUROLUB ADBLUE®
High-purity urea solution for SCR exhaust gas aftertreatment / AUS 32 according to ISO 22241. Application: Do not fill into the fuel tank or other liquid containers of the vehicle, but only into the separate AdBlue® tank marked for this purpose! AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA). Recommended storage temperature between 0°C and +30°C. Avoid direct sunlight. When not in use, AdBlue® containers must be sealed airtight. AdBlue® can freeze at -11°C. It is therefore important to use a storage location where the temperature cannot drop below this value. If AdBlue® is frozen, it can be reused after thawing as it will return to its original state. If the storage instructions are followed properly, AdBlue can be stored for up to one year.